Kyber Network

Liquidity pools are one of the main ways users earn yield in DeFi. By depositing tokens into a pool, liquidity providers help support decentralized swaps and may earn trading fees, rewards or other incentives.
But choosing a pool is not just about picking the highest APR.
A high APR can look attractive, but it may come with low trading volume, short-term incentives, volatile tokens or higher impermanent loss risk. For LPs, the better question is: is this pool worth my capital and risk?
That is where liquidity pool analytics matter.
This guide explains the key liquidity pool performance metrics beginners should know and how KyberEarn 2.0 helps DeFi LPs discover, analyze, enter and manage liquidity positions in one place.
What Is Liquidity Pool Analytics?
Liquidity pool analytics is the data used to evaluate how a liquidity pool is performing.
Instead of looking only at headline APR, LPs can review trading volume, TVL, fees earned, reward sources, active liquidity and position performance. These metrics help LPs understand whether a pool has real demand or is mainly driven by temporary incentives.
For example, two pools may both show 50% APR. One may have strong trading volume and consistent fee generation. The other may have low organic activity but high short-term rewards.
The APR looks similar, but the quality of the opportunity is different.
Why Pool Analytics Matter for DeFi LPs
Liquidity provision is not risk-free. LPs are exposed to token price movement, impermanent loss, smart contract risk, changing rewards and out-of-range positions.
Good analytics help LPs track historical
Compare pools across chains and protocolsUnderstand whether APR comes from trading fees or incentivesCheck if a pool has real trading demandMonitor whether a position is in rangeDecide when to compound, reposition or exit
Without analytics, LPing becomes guesswork. With analytics, LPs can make more informed decisions.
Key Liquidity Pool Metrics Beginners Should Know
APR
APR estimates annualized return based on recent pool or position performance. It is useful for quick comparison, but it changes constantly. APR can rise or fall depending on trading volume, TVL, token price and reward programs. LPs should use APR as a starting point, not the full decision.
TVL
TVL means Total Value Locked. It shows how much capital is deposited in a pool. High TVL usually means deeper liquidity, but it can also reduce returns if fee generation is weak. Low TVL pools may offer higher APR, but they can be more volatile. A useful approach is to compare TVL with trading volume and fees.
Trading Volume
Trading volume shows how much swapping activity happens in a pool. This matters because LP fees usually come from swaps. A pool with consistent volume may generate more reliable fee income than a pool with only short-term volume spikes.
Fees Earned
Fees earned show how much trading fee income the pool has generated. This is important because fee income often reflects organic demand. If most of the yield comes from temporary rewards, the APR may drop when incentives end.
Active Liquidity
In concentrated liquidity pools, LPs choose a price range. If the market price stays inside that range, the position can earn fees. If the price moves outside the range, the position may stop earning fees. This is why active liquidity matters. It shows how much liquidity is actually in range and working.
Position Range
A narrow range can be more capital-efficient and may earn more fees when the price stays inside it. However, it has higher out-of-range risk. A wider range is usually less risky from an out-of-range perspective, but it may earn less efficiently. Beginners should choose a range based on risk tolerance, token volatility and market view.
Pool APR vs Position APR
Pool APR and position APR are not the same.
Pool APR estimates performance at the pool level. Position APR depends on your selected price range, deposit size, active liquidity and earned fees.
This is why your own return may be different from the pool’s headline APR. If your position is out of range or too wide, your actual performance may be lower. Position-level analytics help LPs understand how their own capital is performing.
How KyberEarn 2.0 Helps LPs Analyze Pools
KyberEarn 2.0 is designed to make DeFi liquidity provision easier to discover and manage.
Instead of switching between different DEXs, pool pages, dashboards and reward trackers, users can explore liquidity opportunities across supported protocols from one interface. KyberEarn supports liquidity opportunities from major protocols such as Uniswap, PancakeSwap, Aerodrome, SushiSwap and others.
KyberEarn does not operate the pools directly. It helps users interact with supported third-party pools through a more unified liquidity management experience.
KyberEarn 2.0 Features for LP Performance
KyberEarn 2.0 helps LPs before and after entering a position.
Information — View pool metrics at a glance: TVL, 24h volume, 24h fees, rewards, liquidity utilization and an interactive APR history chart over 24h, 7d or 30d. The chart overlays Est. Pool APR, Active APR and volume so you can see how yields have trended over time.Earning(s) — See the earning history for any pool, broken down by source: LP Fees, LM Rewards, EG Sharing and Bonus incentives. A donut chart shows the total earned and how it splits across sources, while a bar chart tracks daily earnings over your selected period. APR and Active APR are displayed with their fee and reward components side by side.Analytics — Access pool price candlestick charts across 24h, 7d and 30d, powered by Token Settlement Price derived from real on-chain swap events. LPs can also review liquidity flows showing add activity, remove activity, net flow and TVL over time.
KyberEarn also includes KyberZap, which helps users enter supported liquidity positions using one token or multiple tokens. This reduces the friction of manually swapping tokens into the correct pool ratio.
For active management, users can monitor position status, accrued fees and rewards. They can also compound, reposition or withdraw supported positions more efficiently.
Smart Exit gives LPs a more structured way to withdraw liquidity based on predefined exit conditions, such as price threshold, target fee yield or time.
Risks LPs Should Understand
Liquidity provision carries risk. Before entering a pool, LPs should consider:
Impermanent lossOut-of-range positionsSmart contract riskToken volatilityChanging reward programsLow liquidity or low volume
KyberEarn 2.0 helps users analyze and manage liquidity positions, but LPs should still review each pool carefully before depositing capital.
Beginner LP Checklist
Before adding liquidity, check:
What tokens are in the pool?Is the pair stable, correlated or volatile?What is the TVL?What is the trading volume?How much fee revenue is the pool generating?Is the APR from fees, rewards or both?What price range will you choose?What happens if the position goes out of range?When should you compound, reposition or exit?
This checklist helps beginners avoid choosing pools based only on the highest APR.
Why KyberSwap Matters for DeFi LPs
KyberSwap is a Smart DeFi Hub that helps users discover, analyze, execute, track and optimize DeFi opportunities in one place.
For traders, KyberSwap Aggregator connects to over 420 liquidity sources across 17 chains to help users access better swap routes. KyberSwap has facilitated over US$150B in transaction volume and serves millions of users across DeFi.
For LPs, KyberEarn 2.0 brings the same idea to liquidity provision. It helps users compare pools, understand yield more clearly, enter positions with less friction and manage liquidity after depositing.
FAQ
What is liquidity pool analytics?
Liquidity pool analytics is the data used to evaluate pool performance, including APR, TVL, volume, fees, rewards, active liquidity and position performance.
Why should LPs not only look at APR?
APR changes often and may not reflect your actual position performance. LPs should also check volume, fees, TVL, rewards and risk.
What is the difference between Pool APR and Position APR?
Pool APR estimates performance at the pool level. Position APR reflects your own position based on your range, capital size and fees earned.
What is Active APR?
Active APR measures return based on liquidity that is currently in range and earning fees.
What is KyberEarn 2.0?
KyberEarn 2.0 is KyberSwap’s liquidity hub for discovering, analyzing, entering and managing liquidity positions across supported third-party protocols.
Can I add liquidity with one token on KyberEarn?
Yes. KyberZap helps users enter supported liquidity positions using a single token or multiple tokens.
Is liquidity provision safe?
Liquidity provision carries risk, including impermanent loss, smart contract risk, token volatility and out-of-range positions. LPs should always review pool data before depositing.
Conclusion
Liquidity pool analytics helps DeFi LPs make better decisions. Instead of chasing the highest APR, LPs should understand what drives returns and whether their own position is actually earning.
The most important metrics are APR, TVL, volume, fees, active liquidity, position range and reward breakdown.
KyberEarn 2.0 brings these insights into one LP-focused interface. With multiple APR metrics, pool categories, analytics, earning breakdowns, KyberZap, Smart Exit and position management tools, KyberEarn helps users move from simple yield discovery to smarter liquidity management.
For DeFi LPs, better data leads to better decisions.

A sandwich attack is a type of MEV attack where a bot places one transaction before a user’s trade and another transaction after it to profit from the price movement caused by that trade. It is called a “sandwich” because the user’s transaction gets placed between two attacker transactions.
In DeFi, sandwich attacks usually happen on decentralized exchanges when traders swap tokens through automated market makers. A bot sees a pending swap, buys the token before the user, lets the user’s trade push the price higher and then sells after the user’s transaction is executed.
The result is simple: the user receives a worse final price while the attacker captures the difference.
What Is MEV?
MEV stands for Maximal Extractable Value. It refers to value that can be extracted by changing the order, inclusion or timing of transactions inside a block. On public blockchains, pending transactions can often be seen before they are confirmed. Bots monitor these transactions and look for profitable opportunities.
Not all MEV is harmful. Arbitrage can help align prices across markets. However, sandwich attacks are generally harmful because they use a trader’s pending swap and slippage tolerance against them.
How a Sandwich Attack Works
A sandwich attack usually happens in three steps.
First, the bot sees a pending trade in the mempool. It checks the trade size, token pair, liquidity depth and slippage setting. Large trades in low-liquidity pools are more attractive because they can move the market price.
Second, the bot front-runs the user. It places a buy transaction before the user’s swap. This pushes the token price higher before the user’s transaction executes.
Third, the user’s trade goes through at a worse price. Because the bot already moved the price, the user receives fewer tokens than expected.
Finally, the bot back-runs the trade. It sells the token after the user’s swap pushes the price even higher. The bot profits from the difference between its buy and sell price.
Simple Sandwich Attack Example
Imagine a trader wants to swap 100 ETH for Token A. A bot sees the pending transaction and buys Token A first. This pushes the price up before the user’s trade is confirmed. The user’s swap then executes at the higher price. The user still receives Token A, but receives fewer tokens than expected. After that, the bot sells Token A back into the pool at the higher price.
The bot makes a profit. The user pays for that profit through worse execution.
Why Sandwich Attacks Happen
Sandwich attacks happen because DeFi transactions are transparent and automated market maker prices move based on pool balances. When a large swap enters a pool, it changes the ratio between the two assets. Bots can predict this price movement and place trades around it.
Sandwich attacks are more likely when:
The trade size is largePool liquidity is lowThe token is volatileSlippage tolerance is highPrice impact is significantThe transaction is visible before confirmation
Why Slippage Matters
Slippage is the difference between the expected trade price and the final execution price. When users set slippage tolerance, they define how much price movement they are willing to accept before the transaction fails. For example, a 1% slippage setting means the trade can still execute if the final output is up to 1% worse than expected.
High slippage can make a trade more vulnerable because it gives bots more room to move the price against the user. However, slippage that is too low can cause failed transactions during volatile market conditions. The goal is to use realistic slippage based on liquidity, volatility and trade size.
Who Is Most at Risk?
Not every swap has the same sandwich attack risk. Small trades in deep liquidity pools are usually less attractive to bots. Large trades in thin liquidity pools are more exposed because they create bigger price movements.
Higher-risk trades often involve:
Meme coinsNew tokensLow-liquidity pairsVolatile assetsLarge swap sizesFragmented liquidityHigh price impact
How to Reduce Sandwich Attack Risk on KyberSwap
Users cannot remove all onchain execution risk, but they can reduce exposure.
Use realistic slippage settings. Avoid setting slippage much higher than needed.
Check price impact before confirming a swap. High price impact may signal higher risk.
Avoid oversized trades in low-liquidity pools. Splitting trades or using better routing can help reduce price movement.
Trade through deeper liquidity. More liquidity usually means less price impact for the same trade size.
Use tools with MEV-aware execution features. Better routing and execution design can help reduce avoidable value leakage.
Protect Your Swap Trades (Taker Protection)
KyberSwap helps reduce front-running impact by letting you set Max Slippage for each swap. This makes your trade only execute if the final price stays within your slippage interval, limiting losses from price movement caused by MEV strategies.
Use MEV-Protected RPCs on Ethereum (RPC Protection)
On Ethereum, KyberSwap lets you choose MEV-protected RPCs, marked with a green shield icon. Transactions routed this way use a different ordering process and get protection from multiple MEV strategies.
One example is Blink Protect RPC, which:
Routes transactions to the Blink builder instead of the public mempoolProvides front-running protectionAvoids failed transactions, since it is only included if it doesn’t include reverts (with an “uncled / mempool / later included” caveat)
How KyberSwap Helps Improve Swap Execution
KyberSwap is a non-custodial DeFi platform for swapping, earning and trading crypto across chains. KyberSwap Aggregator connects to 420+ liquidity sources across 17 chains, helping users access competitive rates without manually checking many DEXs.
This matters because poor routing, thin liquidity and high price impact can increase the risk of bad execution.
KyberSwap helps users compare liquidity sources, find efficient routes and control swap settings such as slippage. This gives traders more control over the maximum price movement they are willing to accept.
KyberSwap Smart Settlement also adds execution-time intelligence to swaps. Instead of relying only on the best quote before submission, Smart Settlement compares available execution options at settlement and aims to improve the final swap output when the transaction executes onchain.
KyberSwap has facilitated over $150B in aggregator trading volume, showing the scale of trading activity routed through the platform.
While no DeFi product can remove every risk, better routing, deeper liquidity, realistic slippage and execution-aware tools can help traders reduce avoidable value loss.
Final Thoughts
A sandwich attack is a harmful MEV strategy where a bot places one trade before and one trade after a user’s swap.
The user’s transaction still executes, but the final output is worse because the bot moved the price first.
To reduce risk, traders should use realistic slippage, check price impact, avoid large trades in low-liquidity pools and use tools that search deeper liquidity across multiple sources.
KyberSwap helps improve swap execution through its aggregator, 420+ liquidity sources across 17 chains, customizable slippage and Smart Settlement.
FAQ
What is a sandwich attack in crypto?
A sandwich attack is an MEV attack where a bot places one transaction before and one transaction after a user’s swap to profit from the price movement caused by that swap.
Why is it called a sandwich attack?
It is called a sandwich attack because the user’s transaction is placed between two attacker transactions.
Does high slippage increase sandwich attack risk?
Yes. High slippage gives bots more room to move the price against a trade while still allowing the transaction to execute.
Can small trades be sandwiched?
Yes, but small trades are usually less attractive because the bot still needs to cover gas and execution costs.
Can a DEX aggregator prevent all sandwich attacks?
No. A DEX aggregator cannot remove all execution risk, but it can help improve routing, access deeper liquidity and reduce avoidable value leakage.
How does KyberSwap help traders?
KyberSwap Aggregator scans 420+ liquidity sources across 17 chains to find efficient swap routes. Smart Settlement adds execution-time intelligence to help improve final swap output when the transaction settles onchain.

Pašpārvaldes maks ir kriptovalūtu maks, kas sniedz lietotājiem tiešu kontroli pār viņu digitālajiem aktīviem. Tā vietā, lai turētu kriptovalūtu centralizētā biržā vai pie trešās puses glabātāja, pašpārvaldes maks ļauj lietotājiem turēt savas privātās atslēgas, pārvaldīt savus līdzekļus un tieši mijiedarboties ar blokķēdes lietotnēm. Tas ir viens no svarīgākajiem jēdzieniem kriptovalūtās.
Kad cilvēki saka "nevis jūsu atslēgas, nevis jūsu monētas," viņi runā par pašpārvaldi. Ja jūs nekontrolējat privāto atslēgu uz sava maka, jūs pilnībā nekontrolējat iekšā esošo kriptovalūtu.

AI Trading Is Moving From Bots to Agents
Crypto traders used bots for arbitrage, market making, stop losses and portfolio rebalancing long before AI agents became popular. But in 2026, the model is changing.
Traditional trading bots usually follow fixed rules. An AI agent can understand a user's goal, gather context, decide which tools to use and prepare an action across multiple protocols. Instead of saying, "Run this exact strategy every five minutes," a user can say, "Swap part of my ETH to USDC if the route is good and show me the trade before I sign."
That difference matters. Crypto is fragmented across centralized exchanges, decentralized exchanges, chains and liquidity. A useful agent needs to do more than generate text. It needs access to real data and reliable execution tools.
This is where DeFi infrastructure becomes important. AI agents need APIs, MCP servers, skills, quote engines, transaction builders and wallet approval flows. Without these layers, an agent may understand the request but fail at the most important part: executing safely.
What Are Crypto Trading AI Agents?
A crypto trading AI agent can interpret trading intent and coordinate the steps needed to complete a crypto action. The agent may use a large language model for reasoning, APIs for market data, trading infrastructure for execution and a wallet for final approval.
A simple chatbot can explain what ETH is. A trading agent can help prepare a swap from ETH to USDC, compare available routes, estimate output, check slippage, build transaction calldata and ask the user to confirm the transaction.
In DeFi, an AI trading agent may support:
Token swapsCross-chain swapsLimit ordersPortfolio rebalancingLiquidity provisionYield discoveryPosition monitoringRisk checks before execution
The best agents are not fully uncontrolled systems. They are assistants that can prepare actions while keeping the user in control of signing and wallet permissions.
Common AI Crypto Trading Use Cases in 2026
Best-Rate Token Swaps
The user asks the agent to swap one token for another. The agent checks available routes, selects the best expected output and prepares the transaction.
Limit Order Creation
The user asks to buy or sell only at a target price. KyberSwap Limit Order allows users to set preferred swap rates and execute gasless, slippage-free and zero-fee trades when predefined conditions are met.
Liquidity Provision With Zap
The user wants to enter a liquidity position without manually balancing token amounts. KyberZap streamlines liquidity provision and withdrawal by allowing users to zap in with selected tokens, zap out to any token and migrate between positions.
Portfolio Rebalancing
The user asks the agent to reduce risk, increase stablecoin exposure or rotate into specific assets. The agent calculates the required trades and prepares each step for approval.
Cross-Chain Execution
The user wants to move from one token on one chain to another token on another chain. KyberSwap Cross-chain Swaps support transfers and exchanges across 23 blockchain networks including EVM and non-EVM chains.
KyberSwap MCP and Skills for AI Agent Trading
KyberSwap MCP and KyberSwap Skills solve two related problems.
KyberSwap Skills are useful for local coding agents and developer environments. They package DeFi workflows into agent-readable capabilities, helping agents understand how to quote, build, execute, create orders and manage liquidity actions.
KyberSwap MCP is useful for hosted agents. MCP exposes functionality as structured tools that an AI application can discover and call. This makes it easier for agents to move from "I understand the user's goal" to "I can prepare a transaction for the user to review."
The key design principle is user control. The agent can assist with quote discovery, route comparison, transaction building and simulation. The user remains responsible for final signing.
That balance is important for 2026. AI agents should make DeFi easier, but they should not remove the user from critical approval moments.
Risks of AI Agent Crypto Trading
AI agents can improve convenience, but they also introduce new risks. The main risks are unsafe permissions, poor data quality, hallucinated actions, weak transaction review and over-automation.
A strong design should include:
No private key custody by the agentUser approval before executionClear transaction previewSimulation where possibleToken address verificationSlippage and output checksPermission limitsPost-trade status tracking
The goal is not to let AI do anything without oversight. The goal is to let AI prepare better actions faster while users keep control.
Conclusion
AI agents trade crypto in 2026 by connecting natural language intent to real execution infrastructure. They understand a goal, gather market data, compare routes, build transactions, simulate outcomes and pass the final action to the user for approval.
For DeFi, the best agents need more than a model. They need a reliable execution stack. A DEX aggregator helps agents find better routes across fragmented liquidity. MCP makes DeFi tools easier for agents to discover and call. Skills give local agents reusable workflows for trading and liquidity actions.
KyberSwap brings these layers together through Aggregator, MCP, Skills, Limit Order, Zap, Cross-chain Swaps and KyberEarn. That makes it a strong foundation for AI-powered DeFi workflows where agents can help users trade smarter without giving up wallet control.
FAQ
Can AI agents trade crypto automatically?
Yes. AI agents can trade crypto automatically when connected to APIs, trading tools and wallet infrastructure. However, safer DeFi agents should keep users in control of signing and final approval.
Are AI trading agents the same as trading bots?
No. A trading bot usually follows fixed rules. An AI agent can understand natural language, use tools, reason through multi-step workflows and adapt its actions based on context.
What is the best way for AI agents to trade onchain?
For most onchain swaps, a DEX aggregator API is the strongest starting point because it can compare liquidity across many sources. An MCP or Skills layer makes the workflow more agent-friendly.
Why is MCP useful for crypto trading agents?
MCP gives AI applications a standardized way to connect with external tools and data sources. For crypto agents, this can turn swap quotes, transaction building, simulation and order management into structured tools.
Should an AI agent hold my private keys?
No. A safer AI trading agent should not hold private keys. It should prepare the transaction and let the user review and sign through their own wallet.
How does KyberSwap help AI agents trade crypto?
KyberSwap provides Aggregator routing, AI-agent Skills, MCP tooling, Limit Order, Zap, Cross-chain Swaps and liquidity workflows. This helps agents move from user intent to reviewable onchain execution.
What is the biggest risk of AI crypto trading?
The biggest risk is unsafe execution. A bad setup may give an agent too much control, use poor routes or fail to show clear transaction details. Good agent design keeps users in control and makes every transaction reviewable before signing.

Adding liquidity is one of the most common ways to participate in DeFi beyond simply swapping tokens. Instead of only trading assets, liquidity providers deposit tokens into liquidity pools so other users can swap against those pools. This guide explains how to add liquidity on KyberSwap, what to check before entering a pool and how KyberEarn helps simplify the LP experience.
What Does It Mean to Add Liquidity?
Adding liquidity means depositing crypto assets into a liquidity pool. These pools are used by decentralized exchanges and automated market makers to support token swaps.
For example, an ETH/USDC pool contains ETH and USDC. Traders can swap ETH for USDC or USDC for ETH through that pool. Liquidity providers help make those trades possible by supplying the assets.
In return, LPs may earn:
Trading fees from swaps that use the poolLiquidity mining rewards if the pool has an active campaignBonus rewards if supported by incentive partnersFairFlow rewards for eligible pools using KyberSwap FairFlow mechanics
However, adding liquidity is not risk-free. LPs can face impermanent loss, token price volatility, smart contract risk and APR changes. That is why pool selection matters.
Why Use KyberSwap to Add Liquidity?
KyberSwap is built as a Smart DeFi Hub where users can discover, analyze, execute, track and optimize DeFi opportunities in one place. KyberSwap has facilitated over US$150B in transaction volume and connects to more than 420 liquidity sources across 17 chains, helping users access deeper liquidity and better routing across DeFi.
For liquidity providers, KyberEarn focuses on simplifying the LP journey. KyberEarn does not operate liquidity pools directly. Instead, it provides tools to interact with third-party pools, compare earning opportunities and manage positions from one dashboard.
The biggest advantage is KyberZap. Traditional concentrated liquidity positions often require users to hold the exact token pair in the correct ratio. KyberZap removes much of that manual work by letting users add liquidity with a single token or a combination of up to five tokens. KyberZap then handles the token swaps and ratio balancing in the background.
How to Add Liquidity on KyberSwap
Step 1: Go to KyberSwap and Open KyberEarn
Start by going to kyberswap.com and opening the Earn section. This brings you to KyberEarn, where you can browse liquidity pools across supported chains and protocols.
Make sure you are on the correct network before entering a pool. If you want to provide liquidity on Base, Ethereum, Arbitrum, BNB Chain or another supported network, switch your wallet and KyberSwap interface to the right chain.
Step 2: Connect Your Wallet
Connect a non-custodial wallet such as MetaMask, Rabby or another supported Web3 wallet. KyberSwap does not take custody of your funds. You stay in control of your assets and every transaction must be confirmed from your wallet.
Before adding liquidity, make sure your wallet has:
The token or tokens you want to depositEnough native gas token for transaction feesThe correct network selectedA clear understanding of the pool you are entering
For example, if you add liquidity on Arbitrum, you need ETH on Arbitrum to pay gas fees.
Step 3: Explore and Compare Pools
KyberEarn shows pools with useful data such as APR, TVL, volume, fees, rewards and liquidity utilization. This helps LPs evaluate pools beyond just a headline APR number.
KyberEarn also groups pools into categories to make discovery easier. Examples include Farming, Low Volatility, High APR, Highlighted and Solid Earning pools. Farming pools may include active reward programs, Low Volatility pools usually focus on stablecoin or correlated assets and Solid Earning pools highlight pools with stronger recent trading fee activity.
When comparing pools, do not only choose the highest APR. A high APR can come with higher volatility, lower liquidity or higher impermanent loss risk.
A better approach is to check:
Token pair qualityPool TVL24h volumeTrading feesReward sourceHistorical APRPrice volatilityYour own risk tolerance
Step 4: Open the Pool Detail Page
After choosing a pool, open the pool detail page. KyberEarn organizes pool information into readable sections such as Information, Earning(s) and Analytics.
The Information tab helps you review key metrics like TVL, volume, fees and APR history. The Earning(s) tab breaks down possible reward sources such as LP Fees, Liquidity Mining Rewards, Equilibrium Gain Sharing and Bonus rewards. The Analytics tab can include price charts and liquidity flow data, helping you understand how the pool has been behaving over time.
This is useful because liquidity provision is not only about entering a pool. It is also about understanding how that pool performs in real market conditions.
Step 5: Choose “Add Liquidity” or “Zap In”
Once you are ready, click the option to add liquidity or Zap In. This opens the liquidity entry flow.
With KyberZap, you can add liquidity using one token or multiple tokens. For example, you may want to enter an ETH/USDC pool using only ETH, only USDC or a mix of assets already in your wallet.
KyberZap automatically calculates the required ratio for the pool and uses KyberSwap Aggregator routing to handle the needed swaps. This helps reduce manual steps compared with the traditional flow of swapping tokens first, calculating ratios yourself and then depositing.
Step 6: Select Your Input Token and Amount
Choose which token or tokens you want to deposit. KyberEarn supports flexible input, so your deposit token does not always need to match the pool pair.
For example, if the target pool is ETH/USDC, you may be able to enter using another supported token from your wallet. KyberZap handles the conversion into the correct pool assets.
Enter the amount you want to supply and review the estimated result. Do not deposit more than you are comfortable exposing to LP risk.
Step 7: Choose Your Price Range
For concentrated liquidity pools, you may need to choose a price range. Your liquidity earns fees when the market price stays within that range. If the price moves outside the range, your liquidity may become inactive and stop earning trading fees until the price returns or you reposition.
A narrow range can be more capital efficient but usually carries a higher chance of going out of range. A wider range may be safer for staying active but can dilute fee efficiency.
For beginners, a wider range may be easier to manage. More advanced LPs may choose tighter ranges to target higher fee capture.
Step 8: Review APR, Slippage, Zap Impact and Fees
Before confirming, carefully review the quote and transaction details. KyberEarn specifically reminds users to check quoted output, slippage, Zap impact and applicable fees before confirming any Zap action.
This step is important because adding liquidity may involve token swaps. Market conditions can change between quote and confirmation.
Also note that Earn operations executed through KyberZap may include a platform fee. The fee is charged on the input amount and depends on the token pair category. KyberSwap displays applicable fees in the interface before confirmation.
Step 9: Approve and Confirm the Transaction
If it is your first time using a token in the liquidity flow, your wallet may ask you to approve token spending. After approval, you can confirm the main add liquidity transaction.
Once confirmed on-chain, your liquidity position will be created. Depending on the underlying protocol, the position may be represented by an LP position or NFT-style concentrated liquidity position.
Step 10: Track Your Position in My Positions
After adding liquidity, go to My Positions on KyberEarn. This dashboard lets you monitor position status, accrued fees, rewards and whether your position is in-range or out-of-range.
KyberEarn also supports position management actions such as increasing liquidity, claiming fees, withdrawing, compounding, repositioning and using Smart Exit where available.
This is where KyberEarn becomes especially useful. Instead of checking every DEX manually, users can manage liquidity positions across supported chains and protocols in one place.
KyberEarn vs Adding Liquidity Directly on a DEX
Feature KyberEarn Directly on a DEX Pool discovery Aggregates pools across supported protocols Limited to one protocol Token input Single-token or multi-token Zap support Often requires exact pool pair Token ratio calculation Automated by KyberZap Usually manual Pool analytics APR history, earnings breakdown and pool data Varies by DEX Position management Unified dashboard Usually protocol-specific Repositioning One-click repositioning where supported Often manual Exit options Standard withdrawal, Zap Out and Smart Exit where supported Depends on protocol Best for Users who want a simpler LP workflow Users who want direct protocol-level control
KyberEarn is best for users who want a smoother liquidity experience without manually moving between multiple DEXs. Adding liquidity directly on a DEX may still suit advanced users who prefer protocol-native interfaces.
What to Check Before Adding Liquidity
Before adding liquidity on KyberSwap, review the pool carefully. A high APR alone is not enough.
Check whether the token pair is stable, volatile or highly speculative. Stablecoin pairs may have lower impermanent loss risk, while volatile token pairs can offer higher returns but also higher downside risk.
Review TVL and volume together. A pool with high TVL but low volume may produce lower fee returns. A pool with high volume but very low liquidity may be riskier and more volatile.
Also understand the reward source. LP fees come from real trading activity. Liquidity mining rewards and bonus incentives may be temporary. If incentives end, APR can drop.
Finally, check your position range. If your range is too narrow, your position may go out of range quickly. If your range is too wide, your capital may be less efficient.
FAQ
What is KyberEarn?
KyberEarn is KyberSwap’s liquidity hub for discovering, adding and managing liquidity positions across supported third-party protocols. It helps users compare pools, enter positions with Zap and monitor performance from one interface.
Can I add liquidity with one token on KyberSwap?
Yes. KyberZap lets users add liquidity with a single token or a custom combination of up to five tokens. The system handles ratio calculation and swaps in the background.
Does KyberSwap operate the liquidity pools?
No. KyberEarn is a management and interaction layer. The pools are operated by supported third-party protocols such as Uniswap, PancakeSwap, Aerodrome and others.
What can I earn by adding liquidity?
LPs may earn trading fees, liquidity mining rewards, FairFlow rewards or bonus incentives depending on the pool. Reward availability varies by pool and protocol.
What happens if my position goes out of range?
If your concentrated liquidity position goes out of range, it may stop earning trading fees until the price returns to your range. On KyberEarn, you can monitor the position and use repositioning or withdrawal tools when needed.
Is adding liquidity risk-free?
No. Liquidity provision includes risks such as impermanent loss, token volatility, smart contract risk, changing APR and possible out-of-range positions. Users should review pool data and only deposit what they are comfortable risking.
Does KyberEarn charge fees?
Earn operations through KyberZap may include platform fees depending on the token pair category. The interface displays applicable fees before confirmation.
Conclusion
Adding liquidity on KyberSwap is designed to be simpler than the traditional LP process. Through KyberEarn, users can discover pools, compare earning opportunities, add liquidity using flexible token inputs and manage positions from one dashboard.
The main advantage is KyberZap. Instead of manually swapping tokens into the correct ratio, users can enter liquidity positions with one token or multiple tokens and let KyberZap handle the conversion and deposit flow.
For DeFi users who want to earn through liquidity provision, KyberEarn offers a more convenient way to explore opportunities. But LPing still requires careful risk management. Always review pool data, token volatility, APR source, fees, slippage and position range before confirming a transaction.

This article shows how to use Cross-chain Swap on KyberSwap to swap tokens across supported blockchains, compare routes, review fees and track transactions in one place.
What Is a Cross-chain Swap?
A cross-chain swap is a DeFi transaction that lets users exchange tokens across different blockchain networks.
For example, instead of only moving USDC from Ethereum to Arbitrum, a cross-chain swap can let you swap ETH on Ethereum into USDC on Arbitrum. The action combines two goals: moving value across chains and receiving the token you actually want.
This is different from a basic bridge. A bridge usually focuses on transferring the same asset or a wrapped version of the asset from one chain to another. A cross-chain swap focuses on conversion plus movement.
Use a bridge when you want to keep the same asset on another chain. Use a cross-chain swap when you want to receive a different asset on another chain.
Why Use KyberSwap Cross-chain Swap?
KyberSwap is a multi-chain decentralized platform built for trading and earning without intermediaries. Across its product suite, KyberSwap has facilitated over US$150B in transaction volume and connects to more than 420 liquidity sources across 17 chains.
Cross-chain Swap extends that experience beyond single-chain trading. It gives users a simpler way to move across ecosystems without jumping between bridges, DEXs and tracking pages.
KyberSwap Cross-chain Swap supports 23 blockchain networks, including major EVM chains and non-EVM networks such as Bitcoin, Solana and Near. It has also facilitated $50M+ in cross-chain swap volume.
The main benefits are:
One interface: Move and swap assets without opening multiple apps.Route comparison: Compare routes from supported third-party cross-chain providers.More transparency: View rates, fees and estimated arrival times before confirming.Real-time tracking: Track transaction progress directly from the KyberSwap interface.
KyberSwap integrates third-party cross-chain providers and protocols such as Near Intent, Across, Relay Protocol, Debridge, LI.FI and Mayan Finance. The interface compares real-time quotes so users can choose a suitable route without checking each provider manually.
How to Use Cross-chain Swap on KyberSwap
Using Cross-chain Swap on KyberSwap is straightforward. The exact wallet flow depends on the source chain and destination chain, but the general process is the same.
Step 1: Open the Cross-chain Swap Page
Go to KyberSwap and open the Cross-chain tab.
This is where you can choose the source chain, destination chain, input token, output token and swap amount.
The goal is to define what you currently have and what you want to receive.
For example:
From: ETH on ArbitrumTo: USDC on Base
Or:
From: USDT on EthereumTo: BTC on Bitcoin
Step 2: Connect Your Wallet
Click Connect Wallet or Select Wallet in the Cross-chain Swap panel.
Always double-check the destination address. A wrong receiving address may cause funds to be sent to the wrong place.
Step 3: Choose the Source Network
The source network is the blockchain where your current token is located.
If your funds are on Ethereum, select Ethereum. If your funds are on Arbitrum, select Arbitrum. If your funds are on Bitcoin, select Bitcoin.
This step matters because your wallet must hold the input token on the selected source network.
Step 4: Choose the Destination Network
The destination network is where you want to receive the output token.
For example, you may want to receive USDC on Base, ETH on Optimism or BTC on Bitcoin. KyberSwap supports cross-chain swap routes across supported EVM and non-EVM networks, with available routes depending on liquidity and third-party provider support.
Step 5: Select the Token Pair
Next, choose the token you want to swap from and the token you want to receive.
This is where Cross-chain Swap becomes useful. You are not limited to moving the same asset across chains. You can select one token on the source chain and receive another token on the destination chain.
For example:
ETH on Ethereum to USDC on PolygonUSDT on BNB Chain to ETH on ArbitrumUSDC on Base to BTC on Bitcoin
Available token pairs depend on supported routes, liquidity and providers.
Step 6: Enter the Swap Amount
Enter the amount of the source token you want to swap.
After you enter the amount, KyberSwap automatically fetches real-time quotes from available third-party cross-chain protocols. By default, the interface selects the option that provides the best rate among available quotes.
This saves time because you do not need to manually compare bridge providers and DEX routes one by one.
Step 7: Compare Route Options
KyberSwap will show the route details after generating quotes.
You can click More Options to open the Choose Your Route section. This lets you compare available providers, estimated return amounts, fees and estimated arrival times.
The best route is not always just the route with the highest estimated output. You should also consider:
Estimated processing timePlatform feeProtocol fee, if anyDestination chainMinimum receivedRoute providerToken accuracyReceiving address
Some routes may be faster. Some routes may offer better output. Some may involve different fee structures. Reviewing the options helps you choose the route that fits your goal.
Step 8: Review Fees and Minimum Received
Before confirming, review the swap details carefully.
KyberSwap shows the applicable Platform Fee in the swap details section after a route is generated and before the transaction is confirmed. The Platform Fee is separate from any Protocol Fee charged by third-party providers. If a protocol-specific fee applies, it will also be shown in the swap details or route comparison section.
You should also check the minimum received amount. This is important because cross-chain swaps involve route execution, liquidity conditions and network processing. The final output should match the route conditions shown before confirmation, but users should always review the expected amount and minimum amount before signing.
Step 9: Approve the Token
If you are swapping an ERC-20 token or another token that requires approval, you may need to approve it first.
Approval gives the selected contract permission to use the input token for the swap. You only need to approve a token when it has not already been authorized for the selected route.
After approval, click Review the Cross-chain Swap.
Step 10: Confirm the Swap in Your Wallet
A confirmation box will appear. Review all details again:
Source chainDestination chainInput token and amountOutput tokenReceiving addressEstimated outputMinimum receivedEstimated processing timePlatform feeProtocol fee, if applicable
Once everything looks correct, click Confirm Swap and approve the transaction in your wallet.
Step 11: Track the Transaction
After the transaction is submitted, you can track the full cross-chain swap lifecycle in KyberSwap’s transaction history panel.
The transaction history shows details such as time, sender wallet, status, route, input amount, output amount and on-chain transaction records.
The status may show:
Processing: The swap is still in progress.Success: The output tokens have arrived at the receiving address.Failed: The transaction could not be completed and the input tokens are returned to the sender wallet.
Some chains or protocols may take longer than others, so users should check the estimated processing time before confirming.
Best Practices Before Using Cross-chain Swap
Cross-chain swaps are convenient, but users should still be careful. Before confirming any transaction, check these details:
Confirm the destination address
Make sure the address belongs to the correct chain. Sending funds to the wrong address or wrong network can result in loss of funds.
Check the output token
Many tokens have similar names. Always verify that the destination token is the asset you actually want.
Review the route
Compare providers, fees, output amount and processing time. The fastest route may not always give the highest output.
Understand the fees
Cross-chain swaps may include platform fees, protocol fees and gas fees. Review all visible costs before confirming.
Start small when using a new route
For a new wallet, new chain or large transfer, consider testing with a smaller amount first.
Track until completion
Do not assume the transaction is complete after signing. Use the transaction history panel to monitor status until the output token arrives.
When Should You Use KyberSwap Cross-chain Swap?
KyberSwap Cross-chain Swap is useful when you want to move into another ecosystem and receive the asset you need in one flow.
Common examples include:
Moving from Ethereum to Base with a different tokenSwapping from Arbitrum ETH into Polygon USDCEntering a new DeFi opportunity on another chainSending funds to another wallet on another networkMoving from EVM chains to non-EVM chains such as Bitcoin, Solana or NearReducing the need to bridge first and swap later
For users who already know the token they want on the destination chain, Cross-chain Swap is usually more convenient than using a bridge and DEX separately.
FAQ: How to Use Cross-chain Swap on KyberSwap
What is KyberSwap Cross-chain Swap?
KyberSwap Cross-chain Swap is a feature that lets users move and swap assets across supported blockchain networks from one interface. It helps users swap from one token on one chain to another token on another chain without manually using multiple bridges and DEXs.
Is Cross-chain Swap the same as bridging?
No. Bridging usually moves the same asset from one chain to another. Cross-chain Swap moves assets across chains and can also convert them into a different token.
Do I need to connect multiple wallets?
It depends on the route. For EVM-to-EVM swaps, the same EVM wallet may be enough. For routes involving Bitcoin or Near, you may need to enter a receiving address or connect a compatible wallet for that network.
Can I choose my route?
Yes. KyberSwap automatically selects a route by default, but users can open More Options to compare route providers, fees, estimated return and arrival time.
Are there fees for Cross-chain Swap?
Yes. KyberSwap applies a Platform Fee for Cross-chain Swap. Some third-party providers may also charge a Protocol Fee. These fees are displayed before confirmation when applicable.
What happens if a cross-chain swap fails?
If a cross-chain swap fails, the transaction status will show Failed and the input tokens are returned to the sender wallet address, based on the transaction handling shown in the KyberSwap interface.
Why use Cross-chain Swap instead of a bridge?
Use Cross-chain Swap when you want to receive a different token on another chain. It can save time because you do not need to bridge first, switch apps and swap again on the destination chain.
Final Thoughts
Cross-chain Swap on KyberSwap is built for users who want a simpler way to move across DeFi ecosystems.
Instead of managing bridges, DEXs and transaction trackers separately, users can choose the source chain, destination chain, token pair and amount from one interface. KyberSwap then compares available routes, shows the expected output, displays fees and lets users track the transaction in real time.
For anyone moving between chains, Cross-chain Swap makes the process easier: choose what you have, choose what you want to receive, review the route, confirm the swap and track the result.
In a multi-chain DeFi world, the best experience is not only about moving assets. It is about moving into the right asset, on the right chain, with fewer steps.

Slippage is one of the most important concepts every DeFi trader should understand. It can be the difference between the amount you expected to receive and the amount that actually arrives in your wallet.
What Is Slippage?
Slippage is the difference between the expected price and the final executed price of a trade.
For example, suppose you swap ETH for USDC and the interface estimates that you will receive 3,000 USDC. By the time your transaction is confirmed, the market has moved and you receive 2,985 USDC instead. The 15 USDC difference is negative slippage.
Slippage can also be positive. If the market moves in your favor and you receive more tokens than expected, that is positive slippage. In practice, DeFi users often focus on negative slippage because it directly reduces the output received from a swap.
Slippage is common in DeFi because transactions do not execute instantly. They must be submitted, picked up, ordered into a block and confirmed. During that short window, other trades can happen before yours and change the pool price.
Slippage vs Price Impact
Slippage and price impact are closely related, but they are not the same.
Factor Slippage Price Impact Main cause Market movement between quote and execution Trade size compared to available liquidity When it happens After you submit the swap but before settlement During the swap route calculation Common in Volatile markets and delayed execution Large trades and shallow pools How to reduce it Use better routing, lower volatility windows and reasonable max slippage Use deeper liquidity, split trades and aggregators
Price impact happens because your own trade changes the pool price. A larger trade against a smaller pool usually causes higher price impact because the trade consumes more available liquidity.
Slippage happens when market conditions change before your transaction is executed. Both can reduce the final amount you receive, so traders should check both before confirming a swap.
Why Slippage Happens in DeFi
Slippage can happen for several reasons.
1. Market volatility
Crypto markets move quickly. When token prices change within seconds, the quote you saw may no longer match the final execution price.
This is especially common during major news, token launches, high-volume trading events or sudden market moves.
2. Low liquidity
Low-liquidity pools are more sensitive to each trade. A single transaction can move the pool price significantly.
This is why slippage is usually higher for small-cap tokens, newly launched assets and meme coins.
3. Large trade size
The bigger your trade is compared to the available liquidity, the more likely it is to move the price. This creates price impact and can also increase execution risk.
4. Slow transaction confirmation
If your transaction stays pending for too long, the market has more time to move before execution. In DeFi, time to execution is a major factor for slippage risk.
5. MEV and front-running risk
When slippage tolerance is set too high, a transaction may create more room for MEV strategies such as front-running or sandwich attacks. Setting max slippage helps ensure a trade only executes within the price range you accept.
How to Minimize Slippage
1. Use a DEX aggregator instead of checking one DEX manually
One of the easiest ways to reduce slippage is to use a DEX aggregator.
A single DEX may only access liquidity from its own pools. A DEX aggregator can scan many liquidity sources, compare routes and split trades when needed. This can help reduce reliance on one pool and improve the final route.
KyberSwap Aggregator connects to 420+ liquidity sources across 17 chains and can split and reroute trades through capital-efficient sources to help users access better swap rates.
This matters because the best route is not always one pool. Sometimes the most efficient trade is split across several liquidity sources to reduce price impact and improve output.
2. Check price impact before confirming
Before confirming a swap, always look at the price impact.
If price impact is high, the trade is large relative to available liquidity. That means you may receive a much worse average price than expected.
To reduce price impact, you can:
Trade a smaller amountSplit the trade into multiple swapsWait for deeper liquidityUse an aggregator that can split routesAvoid trading illiquid pairs during volatile conditions
KyberSwap Aggregator helps minimize price impact by splitting and rerouting trades across multiple liquidity sources.
3. Set a reasonable max slippage
Max slippage is the maximum price movement you are willing to accept for a trade.
If you set max slippage too low, the trade may fail when the market moves slightly. If you set max slippage too high, the trade may execute at a much worse price than expected.
A practical approach is:
Market condition Possible max slippage approach Stablecoin pairs Lower slippage setting Large-cap tokens with deep liquidity Low to moderate slippage setting Volatile tokens Moderate slippage setting Meme coins or new launches Higher caution, smaller size and manual review Extremely volatile markets Consider waiting or using a limit order
There is no perfect slippage setting for every trade. The right setting depends on token liquidity, volatility, gas conditions and your urgency.
KyberSwap allows traders to customize max slippage so swaps only execute if the final price stays within the accepted range.
4. Avoid trading during extreme volatility
If the market is moving aggressively, slippage risk increases.
This is common during:
Major token announcementsAirdrop claim windowsNew token launchesMarket crashesLarge liquidation eventsSudden volume spikes
During these periods, a quote can become stale quickly. Waiting until the market stabilizes may help reduce slippage.
5. Split large swaps into smaller trades
Large trades often create more price impact. Instead of swapping the full amount at once, you can split the trade into smaller parts.
This can help reduce the impact on a single pool. However, you should also consider gas fees. If gas is expensive, splitting too much may cost more than it saves.
A DEX aggregator can help by splitting the route automatically when doing so improves execution.
6. Trade pairs with deeper liquidity
Deep liquidity usually means better execution.
For example, swapping ETH to USDC on a major chain usually has deeper liquidity than swapping a new meme token into a low-volume asset. Deeper liquidity helps reduce price impact because the pool can absorb larger trades with less price movement.
Before trading, check:
Pool depthTrading volumeToken volatilityPrice impactAvailable routesWhether the token has reliable liquidity sources
7. Use limit orders when price control matters
A market swap prioritizes immediate execution. A limit order prioritizes price control.
If you do not need to execute immediately, a limit order can help you avoid negative slippage because the order only executes when your target price is met. Limit orders are especially useful when you want a specific entry or exit price.
KyberSwap Limit Order allows users to set preferred swap rates and execute gasless, slippage-free and zero-fee trades when predefined conditions are met.
This makes limit orders useful for traders who want more control over price instead of accepting the current market route.
8. Use Smart Settlement for better execution resilience
A good quote is important, but the final execution outcome matters more.
KyberSwap Smart Settlement is an onchain execution layer for KyberSwap Aggregator. It adds real-time pool comparison at the moment of execution. When active, KyberSwap can prepare multiple candidate pools for a swap hop. During execution, the smart contract compares those candidates onchain and selects the pool that gives the highest token output.
This helps reduce the gap between quote and settlement, especially when liquidity conditions change before execution. Smart Settlement is designed to help with risks such as stale routes, volatile tokens, PropAMM price changes, JIT liquidity removal and MEV-related execution issues.
For users, the experience stays simple. You still swap as usual, while execution becomes more adaptive behind the scenes.
Best Practices to Minimize Slippage
Here is a simple checklist before confirming a DeFi swap:
Step Why it matters Check price impact Helps you understand how much your trade moves the market Review max slippage Protects your trade from executing outside your accepted range Use an aggregator Finds better routes across multiple liquidity sources Avoid volatile windows Reduces the chance of quote changes before execution Split large trades Can reduce price impact when liquidity is shallow Use limit orders Helps control execution price Review token liquidity Lower liquidity usually means higher slippage risk Consider gas conditions Slow or delayed execution can increase slippage risk
Why KyberSwap Is Useful for Slippage Reduction
KyberSwap is a non-custodial and a NO KYC DeFi platform that helps users swap, earn and trade crypto at competitive rates across chains. KyberSwap Aggregator is built to scan liquidity sources and route trades through efficient paths rather than forcing users to manually compare DEXs one by one.
KyberSwap’s ecosystem has facilitated over US$150B in transaction volume across Swap, Limit Order, Cross-chain Swaps and Kyber Earn.
For traders trying to minimize slippage, the most relevant KyberSwap features are:
KyberSwap Aggregator: Finds efficient routes across 420+ liquidity sources.Max Slippage setting: Lets users define the accepted execution range.Smart Settlement: Adds execution-time pool comparison for more adaptive routing.Limit Order: Helps users trade at a preferred price without negative slippage.Cross-chain Swaps: Lets users transfer and exchange assets across 23 supported blockchain networks.
Together, these tools help traders improve the path from quote to execution.
FAQ: How to Minimize Slippage
What is the easiest way to minimize slippage?
The easiest way is to use a DEX aggregator, trade through deep liquidity, avoid volatile market periods and set a reasonable max slippage before confirming the swap.
Is lower slippage tolerance always better?
Not always. A very low slippage setting gives stronger price protection, but it can also make your transaction fail if the market moves slightly. A higher setting improves the chance of execution, but it can expose you to worse rates.
What slippage setting should I use?
There is no universal number. Stablecoin swaps may use a low setting, while volatile or low-liquidity tokens may require more flexibility. Always check price impact and route quality before confirming.
Can slippage be positive?
Yes. Positive slippage happens when the final execution price is better than the quoted price. However, traders usually focus on negative slippage because it reduces the amount received.
Does a limit order have slippage?
A limit order is designed to execute only at the specified price or better. This makes it useful for traders who want price control instead of immediate execution.
How does KyberSwap help reduce slippage?
KyberSwap Aggregator scans multiple liquidity sources to find efficient swap routes. Traders can also customize max slippage, use Limit Order for price control and benefit from Smart Settlement when execution-time pool comparison is available.
Conclusion
Slippage is part of DeFi trading, but it can be managed.
The best way to minimize slippage is to understand what causes it, check price impact, use deep liquidity, set max slippage carefully and avoid trading during extreme volatility.
For better execution, KyberSwap gives traders access to aggregation, custom slippage settings, Limit Order and Smart Settlement. Instead of manually comparing routes across DEXs, users can swap through KyberSwap to access smarter routing and a more protected trading experience.

Limit orders are one of the most useful trading tools in crypto. Instead of swapping instantly at the current market price, you can set the price you want and let the order wait until the market reaches it.
What Is a Limit Order?
KyberSwap Limit Order was created to enable our users to trade on their own terms. This means users are able to predefine their preferred swap rates which are automatically settled on-chain by KyberSwap's network of takers. Create, modify, and cancel limit orders for free with KyberSwap Limit Order.
No more having to monitor the markets around the clock waiting for your target price to be reached. Trades are always settled when prices favor the trader, meaning that users might actually receive more tokens than expected. Critically, users have complete ownership of their assets until a matching trade has been found.
For example, suppose ETH is trading at $3,500 but you only want to buy when it drops to $3,300. You can create a limit order to buy ETH at $3,300. If the market reaches that level and the order can be filled, the trade executes.
The same idea works for selling. If you hold a token and want to sell only when the price rises to a certain level, you can set that price in advance.
A normal swap is for instant execution. A limit order is for price-based execution.
KyberSwap Limit Order allows traders to swap tokens at a specified price or better, giving users more control over when and how they trade.
Why Use Limit Order on KyberSwap?
Crypto markets move quickly. Prices can change while you sleep, work or step away from your screen. A limit order helps you plan trades ahead of time instead of reacting emotionally.
KyberSwap Limit Order is useful when you want to:
Buy a token only if the price drops to your targetSell a token only if the price reaches your take-profit levelAvoid watching charts all dayTrade with more disciplineReduce impulsive entries and exitsSet a clear trading plan before the market moves
KyberSwap is more than a simple swap interface. It is a Smart DeFi Hub where users can access Swap, Limit Order, Cross-chain Swap and KyberEarn in one place. KyberSwap Aggregator connects to 420+ liquidity sources across 17 chains and has facilitated over US$150B in transactions.
Limit Order vs Instant Swap
Both tools are useful, but they serve different needs.
Use Limit Order when price matters more than speed.
Use Instant Swap when speed matters more than waiting for a target price.
For example, if you need USDC now to enter another DeFi position, an instant swap may be better. But if you want to buy ETH only after a pullback, a limit order is usually the better choice.
How to Use Limit Order on KyberSwap
Step 1: Go to KyberSwap
Open the KyberSwap app and connect your Web3 wallet.
Make sure you are using the correct wallet and the correct network. If your funds are on Ethereum, connect to Ethereum. If your funds are on BNB Chain, Arbitrum or another supported network, switch to that network before creating your order.
KyberSwap is non-custodial. That means users trade directly from their own wallets and remain in control of their assets.
Step 2: Open the Limit Order Page
Go to the trading interface and choose Limit Order.
The Limit Order page looks similar to a normal swap page, but there is one major difference. Instead of accepting the current market rate, you set the rate you want.
This gives you more control over your trading condition.
Step 3: Choose the Token You Want to Sell
Select the token you want to sell.
This is the token that will leave your wallet if the order is filled. For example, if you want to use USDC to buy ETH, choose USDC as the token you sell.
Check your wallet balance before continuing. You need enough token balance for the order amount.
Step 4: Choose the Token You Want to Receive
Next, choose the token you want to receive.
For example:
Sell USDC to buy ETHSell ETH to receive USDCSell KNC to receive USDTSell a token when it reaches your target price
Always double-check the token contract, especially when trading smaller or newer tokens. Some tokens may have similar names or symbols.
Step 5: Enter the Amount
Enter the amount you want to trade.
You can choose a small amount if you are testing the flow for the first time. You can also enter a larger amount if you already know your target and trading plan.
Before placing the order, make sure you understand the value of the trade, the selected pair and the expected output.
Step 6: Set Your Target Price
This is the most important step.
The target price is the price condition for your order. The order will execute only if the market reaches your selected price or better.
For a buy order, your target price is usually lower than the current market price.
For a sell order, your target price is usually higher than the current market price.
Example:
ETH is trading at $3,500. You want to buy only if ETH drops to $3,300. You set your limit order at $3,300.
Another example:
You bought a token at $1.00 and want to sell at $1.30. You can set a sell limit order at that target.
A realistic target has a better chance of being filled. A target that is too far from the market may stay open for a long time or expire without execution.
Step 7: Set the Expiry Time
The expiry time controls how long your order remains active.
A short expiry is useful for short-term trading. A longer expiry gives the market more time to reach your target price.
There is no perfect expiry for every trade. It depends on your strategy, token volatility and how patient you want to be.
For example, a short-term trader may set an order for a few hours. A swing trader may prefer a longer duration.
Step 8: Approve the Token if Needed
If you are using a token for the first time on KyberSwap Limit Order, your wallet may ask you to approve token spending.
Approval gives the smart contract permission to use the token for the order. This is a normal DeFi step, but you should still review the request carefully.
Step 9: Place the Limit Order
After reviewing the order, confirm the wallet request.
Once placed, the order will appear in your active orders. You can monitor its status from the Limit Order page.
How to Check Your Limit Order Status
After placing an order, you can check it from your order list.
A limit order can have different statuses:
Active: The order is active and waiting to be filledPartially filled: Part of the order has been executedFilled: The full order has been executedExpired: The order expired before being fully filledCancelled: The order was cancelled by the user
A limit order is not guaranteed to fill. It depends on market price, liquidity, order size and whether a taker is available to execute the trade.
How to Cancel a Limit Order on KyberSwap
KyberSwap supports two main cancellation options: Gasless Cancel and Hard Cancel.
Gasless Cancel lets users cancel a limit order without paying gas, though users may need to wait up to 5 minutes for the cancellation to be confirmed. Hard Cancel cancels the order immediately onchain and requires a gas fee.
Gasless Cancel is useful when saving gas is more important than instant cancellation.
Hard Cancel is useful when you want the order cancelled as quickly as possible.
For example, if the market moves sharply and you no longer want the order to be filled, Hard Cancel may be the safer choice. If there is no urgency, Gasless Cancel may be enough.
Best Practices for Using Limit Orders
1. Set a realistic target price
A very aggressive target may look attractive, but it may never fill. Check current market conditions before setting your price.
2. Use longer expiry for wider targets
If your target price is far from the current market, give the order more time. A short expiry may end before the market has a chance to move.
3. Check token liquidity
Low-liquidity tokens can be harder to trade. Even if the market touches your target, the order may not fill if liquidity is weak or the order is not attractive for takers.
4. Keep native gas token in your wallet
You may need gas for approval, Hard Cancel or other onchain actions. Keep ETH, BNB, POL, AVAX or the relevant native token for the chain you are using.
5. Review every wallet request
Always check what your wallet asks you to approve or sign. Make sure the token, amount and network are correct.
FAQ
What is KyberSwap Limit Order?
KyberSwap Limit Order is a trading feature that lets users buy or sell tokens at a selected price or better.
Is a limit order the same as a swap?
No. A swap executes immediately at the current available rate. A limit order waits until your target price is reached.
Does a limit order always execute?
No. A limit order only executes if the market reaches your target price and the order can be filled.
When should I use Limit Order?
Use Limit Order when you have a specific buy or sell price in mind and do not need immediate execution.
When should I use Instant Swap?
Use Instant Swap when you want to trade immediately and accept the current available market rate.
Can beginners use limit orders?
Yes. Limit orders can help beginners trade with more discipline, but users should understand that execution is not guaranteed.
Conclusion
KyberSwap Limit Order is a useful tool for traders who want more control over their price.
Instead of swapping immediately, users can set a target price, choose an expiry time and let the order wait for the right market condition. This helps traders plan entries, set take-profit levels and avoid emotional decisions.
Use Instant Swap when you need speed. Use Limit Order when you want to trade at your chosen price.
For traders who want a smarter way to manage onchain trades, KyberSwap Limit Order adds more flexibility to the trading experience while keeping users in control of their funds.

A non-custodial platform lets users access DeFi without giving up control of their assets. This guide explains how non-custodial platforms work, how they compare with custodial platforms and how KyberSwap supports wallet-based swaps, cross-chain trading, limit orders and DeFi opportunities.
What Does Non-Custodial Mean?
Non-custodial means the platform does not hold your private keys or directly control your assets. Your tokens stay in your wallet until you approve and sign a transaction.
A custodial platform works differently. When users deposit crypto into a centralized exchange or custodial app, the platform controls the wallet infrastructure on their behalf. The user sees an account balance but the actual asset control depends on the custodian.
With a non-custodial platform, the user controls the wallet. That means the user also carries more responsibility. There is no password reset for a lost seed phrase. There is no central support team that can reverse a blockchain transaction after it is confirmed.
How a Non-Custodial Platform Works
A non-custodial platform usually works through a wallet connection. The user opens the platform, connects a wallet such as MetaMask or another Web3 wallet, chooses an action and reviews the transaction details before signing.
For example, in a token swap, the user selects the token they want to sell, the token they want to receive and the amount. The platform calculates the route, shows the estimated output, displays fees and asks the user to confirm. The transaction only happens after the user signs from their wallet.
This is important because the platform can provide the interface and routing logic without taking custody of user funds. The user’s wallet remains the control center.
Non-Custodial vs Custodial Platforms
Neither model is perfect for every user. Custodial platforms can feel easier for beginners because they often provide account recovery, customer support and fiat services. Non-custodial platforms are better suited for users who want more control, direct onchain access and fewer custody assumptions.
Why Non-Custodial Platforms Matter in DeFi
DeFi is built around open financial infrastructure. Instead of depending on one centralized company, users can interact with smart contracts, liquidity pools, DEX aggregators, lending markets and other onchain protocols.
Non-custodial platforms support this model because they let users access DeFi without handing over asset custody. This gives users more direct control over how they trade, earn and move assets across chains.
The trade-off is personal responsibility. Users must check the platform URL, review token approvals, understand slippage, protect their wallet and avoid signing suspicious transactions. Non-custodial does not mean risk-free. It means the platform does not custody funds.
KyberSwap as a Non-Custodial Platform
KyberSwap is a non-custodial DeFi platform for users who want to swap, earn and trade crypto across chains. User funds are not held by KyberSwap. KyberSwap also does not charge users protocol fees for swapping tokens, although users still pay network fees and liquidity provider fees where applicable.
KyberSwap helps users access DeFi through several products:
KyberSwap Aggregator — Finds efficient swap routes across liquidity sourcesCross-chain Swap — Lets users transfer and exchange assets across supported chainsLimit Order — Lets users place trades that execute only when predefined conditions are metKyberEarn — Helps users discover, enter and manage liquidity opportunitiesKyberZap — Lets users enter or exit liquidity positions more easily
KyberSwap Cross-chain Swap supports asset transfers and exchanges across 23 supported blockchain networks, including EVM and non-EVM chains. KyberZap also helps users zap in with single or multiple tokens, zap out to any token and migrate between positions.
How KyberSwap Aggregator Fits the Non-Custodial Model
KyberSwap Aggregator is designed to help users find better swap routes across fragmented DeFi liquidity. Liquidity in DeFi is spread across different DEXs, AMMs, order books and liquidity venues. A DEX aggregator connects these sources and calculates efficient trade routes based on swap rates, slippage and gas fees.
This matters for non-custodial users because they do not need to manually check every DEX. Instead, they can use one platform to compare and execute a swap while still signing from their own wallet.
KyberSwap Aggregator has recorded $7.8B in 30-day DEX aggregator volume and $153B in cumulative DEX aggregator volume at the time of lookup.
What Users Should Check Before Using a Non-Custodial Platform
A non-custodial platform gives users more control but also requires better habits. Before using any DeFi platform, users should check the official website, confirm wallet connection details and review every transaction before signing.
Users should also understand token approvals. Some DeFi transactions require approval before a swap or liquidity action. This gives a smart contract permission to use a specific token amount from the wallet. It is good practice to avoid unlimited approvals unless necessary and to revoke old approvals when they are no longer needed.
Slippage is another key concept. In volatile markets, the final output may differ from the quoted output. A strong swap platform should help users compare routes, understand expected output and set a maximum slippage level before execution.
Is a Non-Custodial Platform Safer?
A non-custodial platform can reduce custody risk because the platform does not hold user funds. However, it does not remove all risk.
Users can still lose funds through phishing, malicious approvals, fake websites, wallet compromise, smart contract risk, poor slippage settings or market volatility. That is why self-custody requires both control and discipline.
The best way to think about it is simple: non-custodial platforms reduce the need to trust a company with custody but increase the need for users to protect their own wallets.
Why KyberSwap Is an Option for Non-Custodial DeFi Users
KyberSwap is a strong option for users who want a non-custodial platform with multiple DeFi actions in one place. Users can swap tokens, use cross-chain swaps, place limit orders and explore liquidity opportunities without depositing funds into a centralized account.
For traders, KyberSwap Aggregator helps search across fragmented liquidity and route swaps more efficiently. For users moving across chains, Cross-chain Swap simplifies the process by combining transfer and exchange flows. For users who want more control over execution price, Limit Order can help them define the rate they want before the trade executes.
KyberSwap also supports a broader DeFi workflow: discover opportunities, analyze routes, execute trades, track activity and optimize positions. That makes it more than a simple swap interface — it becomes a non-custodial hub for users who want to move across DeFi while keeping control of their own assets.
FAQ
What is a non-custodial platform?
A non-custodial platform is a crypto platform that lets users interact with blockchain services without giving the platform custody of their funds. Users connect their own wallet and sign transactions themselves.
Is KyberSwap non-custodial?
Yes. KyberSwap is a non-custodial, no-KYC platform, allowing users to swap tokens directly from their own wallets while staying in control of their funds.
Does non-custodial mean risk-free?
No. Non-custodial means users keep control of their assets but it does not remove smart contract risk, phishing risk, wallet security risk or market risk.
What is the difference between custodial and non-custodial?
In a custodial platform, a third party holds assets for the user. In a non-custodial platform, the user controls assets through their own wallet and signs transactions directly.
Do users need to deposit funds into KyberSwap?
No. KyberSwap does not custody user funds. Users connect a wallet and sign transactions from that wallet.
Why use KyberSwap instead of going to one DEX directly?
KyberSwap Aggregator can search across multiple liquidity sources and routes instead of relying on one pool or one DEX. This helps users access more competitive routes while keeping the non-custodial experience.
Conclusion
A non-custodial platform gives crypto users more control over their assets. Instead of depositing tokens into a centralized account, users connect their own wallet, review transactions and sign onchain actions themselves.
This model is especially important in DeFi because it supports open access, transparency and user ownership. The trade-off is responsibility: users must protect their wallets, verify transactions and understand the risks of onchain activity.
KyberSwap is one option for users who want a non-custodial DeFi platform to swap, trade across chains, use limit orders and explore liquidity opportunities. With KyberSwap Aggregator, Cross-chain Swap, Limit Order, KyberEarn and KyberZap, users can access a broader DeFi workflow while keeping custody of their own funds.

Swapping tokens is one of the most common actions in DeFi. Whether you want to trade ETH for USDC, buy a new token, swap stablecoins or rebalance your portfolio, the goal is simple: receive the best possible output with a smooth onchain experience.
Why Swap on KyberSwap?
DeFi liquidity is fragmented. The best rate for a token pair may be on one DEX, while another DEX may have worse liquidity or higher price impact.
KyberSwap Aggregator solves this by routing trades across multiple DEXs and liquidity sources. This helps users receive better output without opening multiple tabs or manually checking prices.
Key benefits include:
Access to 400+ DEXs across 17 chainsOptimized swap routes through KyberSwap AggregatorSimple wallet-based experienceNo traditional account requiredSupport for major DeFi actions in one platformProduct options such as Limit Order, Cross-chain Swap and KyberEarn
Access to 400+ DEXs across 17 chainsOptimized swap routes through KyberSwap AggregatorSimple wallet-based experienceNo traditional account requiredSupport for major DeFi actions in one platformProduct options such as Limit Order, Cross-chain Swap and KyberEarn
For users, this means a faster and more efficient way to swap tokens onchain.
How to Swap on KyberSwap.com
1. Open KyberSwap.com
Go to KyberSwap.com and open the Swap page. Always double-check the URL before connecting your wallet.
You will need a Web3 wallet such as MetaMask, Rabby, Trust Wallet, Coinbase Wallet or another supported wallet. You also need enough native gas token on the selected network to pay transaction fees.
For example, ETH is used for gas on Ethereum and Base, while BNB is used on BNB Chain.
2. Connect Your Wallet
Click Connect Wallet and choose your preferred wallet. Approve the connection request in your wallet.
Connecting your wallet lets KyberSwap read your wallet address, balance and selected network. It does not give KyberSwap control over your funds as KyberSwap is a non-custodial platform and you must approve every transaction.
After connecting, select the chain you want to swap on.
3. Choose the Token Swap Pair
You can search by token name, symbol or contract address. For newer or less common tokens, using the contract address is safer because some tokens may have similar names.
Always verify the token contract before trading unfamiliar assets.
KyberSwap will show an estimated output based on the current route, available liquidity and market conditions.
You can enter the amount manually or use quick options such as Max or Half when available. When using Max, remember to leave enough native token for gas.
4. Review the Swap Details
Before confirming, review the key swap information:
DetailMeaningEstimated outputThe amount you are expected to receiveMinimum receivedThe lowest amount you will receive if the swap succeedsPrice impactHow much your trade affects the market priceSlippageThe accepted difference between quote and executionGas feeThe blockchain network feeRouteThe path used to execute your swap
The most important number is minimum received. If the final output falls below this amount, the swap will revert instead of executing at a worse rate.
5. Adjust Slippage
Slippage is the difference between the quoted price and final execution price. It can happen because token prices and liquidity change before your transaction is confirmed.
KyberSwap lets you set Max Slippage. Lower slippage gives more protection but may increase failed transactions. Higher slippage gives more room for execution but may result in worse output.
Simple guide:
Swap TypeSuggested ApproachStablecoin swapLower slippageMajor liquid pairModerate slippageVolatile tokenHigher slippage may be neededLow-liquidity tokenReview price impact carefullyLarge tradeConsider splitting or using Limit Order
6. Approve the Token
If this is your first time swapping a token through KyberSwap on that chain, you may need to approve it first.
Token approval gives the smart contract permission to use the token for your swap. Some tokens may also support Permit, which allows gasless approval through a signed message.
Review approval amounts carefully. Exact approval can reduce risk, while unlimited approval can be more convenient for frequent traders.
7. Confirm the Swap
After approval, click Swap and review the final confirmation screen.
Check the output amount, minimum received, slippage, gas fee and token pair again. If everything looks correct, confirm the transaction in your wallet.
Once confirmed, the transaction will be submitted onchain.
8. Track Your Swap
After submitting, you can track the transaction in your wallet, on KyberSwap or through a blockchain explorer.
If the output token does not appear in your wallet, you may need to import the token manually using its contract address.
KyberSwap Swap vs Other Trading Options
OptionBest ForMain BenefitKyberSwap SwapInstant token swapsAggregates liquidity for better ratesSingle DEXSimple direct swapsEasy if you already know the best poolCEX tradeOffchain tradingFast but requires centralized custodyKyberSwap Limit OrderTarget price tradingExecutes only at your selected price or betterKyberSwap Cross-chain SwapMoving across chainsSwap between networks from one interface
For instant onchain swaps, KyberSwap Swap is ideal. For target-price execution, KyberSwap Limit Order may be better. For moving assets across networks, Cross-chain Swap is the better fit.
Tips for Better Swap Results
Always check the estimated output and minimum received before confirming.
Watch price impact, especially for large trades or low-liquidity tokens.
Set slippage based on market conditions. Too low may fail. Too high may result in worse execution.
Verify token contracts before swapping unfamiliar assets.
Review every wallet request before signing.
FAQ
What is KyberSwap used for?
KyberSwap is used for token swaps, cross-chain swaps, limit orders, earning opportunities and DeFi portfolio actions.
Do I need an account?
No. You only need a Web3 wallet.
Does KyberSwap charge a swap fee?
KyberSwap does not charge a flat interface swap fee. Users still pay network gas fees and liquidity-related costs reflected in the output.
What is slippage?
Slippage is the difference between the quoted price and final execution price.
What does minimum received mean?
Minimum received is the lowest output amount you accept. If the swap cannot meet it, the transaction reverts.
Why did my swap fail?
A swap may fail because of price movement, low slippage, network congestion, insufficient gas or liquidity changes.
Can I swap custom tokens?
Yes. You can search by contract address and import supported tokens, but always verify the token first.
Final Thoughts
Swapping on KyberSwap.com is simple: connect your wallet, choose a chain, select your tokens, review the route, approve the token and confirm the swap.
Behind the simple interface, KyberSwap Aggregator compares routes across 400+ DEXs on 17 chains to help users access better rates and smoother execution.
For DeFi users, the best swap is not only about speed. It is about receiving more tokens, managing slippage and staying in control of every transaction.

AI aģenti maina, kā lietotāji mijiedarbojas ar DeFi. Labākie tirdzniecības aģenti ne tikai analizē tirgus. Viņiem arī nepieciešamas praktiskas prasmes, kas palīdz viņiem veikt cenu noteikšanu, būvēt, izpildīt, uzraudzīt un optimizēt darījumus droši.
AI aģenti kļūst par vienu no svarīgākajiem saskarnēm onchain tirdzniecībā. Tā vietā, lai manuāli pārbaudītu cenas, salīdzinātu maršrutus, atvērtu vairākas dApps un pārvietotos starp maciņiem, lietotāji var aprakstīt, ko viņi vēlas, dabiskā valodā un ļaut AI aģentam sagatavot darba plūsmu.
Bet AI aģents ir noderīgs tikai tad, ja tam ir pareizās prasmes.

AI aģenti ātri pāriet no vienkāršiem čatbotiem uz rīcību virzošiem sistēmām. Kripto un DeFi jomā tas nozīmē, ka aģenti vairs tikai nepaskaidro tirgus datus. Viņi var palīdzēt lietotājiem atrast tirdzniecības iespējas, salīdzināt maršrutus, veidot transakcijas, izveidot limitpasūtījumus un pārvaldīt likviditātes pozīcijas.
Bet, lai AI aģents varētu droši un efektīvi tirgoties, tam ir nepieciešama pareizā API slāņa.
Tirdzniecības API AI aģentam atšķiras no parasta biržas API. Parasts API var atgriezt tikai tokenu cenas vai ļaut veikt pirkšanas un pārdošanas pasūtījumus. AI tirdzniecības API ir jāatbalsta loģika, maršrutēšana, transakciju veidošana, simulācija un lietotāja kontrolēta izpilde.