𝐂𝐫𝐲𝐩𝐭𝐨 𝐁𝐥𝐞𝐞𝐝𝐢𝐧𝐠 𝐑𝐞𝐝 𝐎𝐧𝐥𝐲 𝐭𝐡𝐞 𝐁𝐫𝐚𝐯𝐞 𝐀𝐫𝐞 𝐁𝐮𝐲𝐢𝐧𝐠 𝐭𝐡𝐞 𝐃𝐢𝐩❗❗
The market’s flashing red across the board, and it’s not just a tiny dip it’s a full-blown bloodbath. From $BTTC to #Altcoins👀🚀 like $TRUMP , #ENA , #SUI , #VIRTUAL , and #STX , almost every major name is slipping lower with losses stacking up between -1% to -3%. Only a few green warriors like $POL and $RAY are still standing tall.
It’s one of those rare gut-check moments panic sellers are heading for the exits, while real players are quietly scooping up bargains. When fear fills the air, opportunities are born but only the bold will dare to strike.
{spot}(BTTCUSDT)
{spot}(TRUMPUSDT)
{spot}(POLUSDT)
Sure! Here's the concept of SMC in simple words:
SMC stands for Sheet Molding Compound.
It’s a special material made by mixing fibers (like glass fibers) with a thick, sticky resin (like plastic). Imagine it like a thick, flexible sheet — almost like dough — that can be easily shaped into different parts using heat and pressure.
In simple steps:
First, they make the SMC sheet by mixing fibers and resin.
Then, they put the sheet into a mold (a shaped container).
They heat and press it, and the SMC takes the shape of the mold.
After it cools down, you get a strong, lightweight, and durable part.
Where is SMC used?
Car parts (like bumpers and hoods)
Electrical panels
Water tanks
Furniture
Why use SMC?
It’s strong but light.
It doesn’t rust like metal.
It can be made into complex shapes easily.
Would you also like a small diagram to make it even easier?
"𝗔𝗟𝗣𝗔𝗖𝗔 𝗠𝗼𝗻𝗲𝘆 𝗜𝗻𝗳𝗹𝗼𝘄 𝗦𝘂𝗿𝗴𝗲: 𝗦𝗺𝗮𝗿𝘁 𝗠𝗼𝗻𝗲𝘆 𝗼𝗻 𝘁𝗵𝗲 𝗠𝗼𝘃𝗲!"#
$ALPACA 24h Money Inflow Update
⚡ Around 14:00, a massive inflow was recorded, signaling strong buying pressure.
⬆️ The inflow peaked sharply, hitting over 6.5 million — a major liquidity injection!
⚖️ After the spike, the market showed some correction but maintained higher levels compared to the start.
📈 Between 18:00 and 22:00, inflow remained active with small pumps, showing that buyers were still interested but cautious.
⏰ From midnight to early morning (around 06:00), another strong wave of inflow came in, making a higher local top.
🔄 Volatility increased slightly, suggesting active positioning by traders.
👀 Smart money could be accumulating during these dips and pumps — a bullish sign if sustained.
🚀 If this momentum continues, ALPACA could be setting up for a bigger breakout soon.
#EthereumFuture #BinanceAlphaAlert #xrpetf
{future}(ALPACAUSDT)
Ethereum Jumps 12% Following Trump's Call for Fed Rate Cuts!
$ETH surged above $1,825, outperforming both $SOL and $XRP this week. A fresh wave of investor interest, along with over $164M in staking inflows, is tightening supply and fueling market confidence. If the momentum continues, a move toward $1,950 could be on the horizon!
#ETH #MarketRebound
Touching down in Dubai for @token2049? 🛬
Meet our incredible lineup of expert panelists at RWA Eco Day,
the premier gathering where you can connect with Plume’s vibrant global community of builders, projects, and founders.
Grab expert insights from:
🏝️ NK Yoon, Head of Growth, @StartaleGroup
🏝️ @Mansa_mlk, CEO, @MANSA_FI
🏝️ @0xKGOG, Partner, @cypher_capital
🏝️ @konyk001, CEO, @gaib_ai
🏝️ Giovanni Everduin, Chief Strategy and Innovation Officer, CBI
🏝️ @Andrew_Serafund, Co-Founder, @serafund
🏝️ Henry Bezant, BD, @LaserDigital_
Touching down in Dubai for @token2049? 🛬
Meet our incredible lineup of expert panelists at RWA Eco Day,
the premier gathering where you can connect with Plume’s vibrant global community of builders, projects, and founders.
Grab expert insights from:
🏝️ NK Yoon, Head of Growth, @StartaleGroup
🏝️ @Mansa_mlk, CEO, @MANSA_FI
🏝️ @0xKGOG, Partner, @cypher_capital
🏝️ @konyk001, CEO, @gaib_ai
🏝️ Giovanni Everduin, Chief Strategy and Innovation Officer, CBI
🏝️ @Andrew_Serafund, Co-Founder, @serafund
🏝️ Henry Bezant, BD, @LaserDigital_